DH2 Series amplifier

 DH2 Series amplifier
 DH2 Series amplifier
  • Technical parameters
  • Brief introduction
  • System configuration
  • Accessories
  • Download
DH Series
DH800
DH1000
DH1300
DH1500
Output Power
20-20KHz, 1W with 1 KHz 
8¦Stereo Power(RMS)
800WX2
1000WX2
1300WX2
1500WX2
4¦Stereo Power(RMS)
1300WX2
1800WX2
2300WX2
2700WX2
8¦Bridged Power(RMS)
2600W
3600W
4600W
5400W
4ΩPink Noise 12dB peak factor4Ω: 
2x1580W
2x2180W
2x2700W
2x3100W
Frequency Response(+o/-0.3dB,1W/8¦)
20 Hz - 34 KHz
THD 20 Hz - 20 kHz for 1 W
<0.05%
Signal-to-Noise Ratio
105 dB
105 dB
107 dB
108 dB
Crosstalk (20Hz-20kHz):>
>70 dB
Damping Factor(20Hz-1kHz)
>800 
Input Connectors (per channel)
3-pin XLR, electronically balanced
Output Connectors (per channel)
Binding Posts 2-pole
Slew Rate
>65 V/μs 
Sensitivity (rated power  8Ω)
3.9/1.9/1V
4.5/2.2/1.1V
5.1/2.6/1.3V
5.5/2.4/1.4V 
Operating voltage, 230 V  nominal
220-230  V selectable
Voltage Gain(dB)
26/32/38dB  dB selectable
Input impedance
20 kOhm
Level adjustment (per ch.)
Front-panel potentiometer, 31 position detented from -inf to 0 dB
Dimensions W x H x D (mm):
483x89x411
483x89x460
Net Weight
12kg
14kg
Features: 
◆ Intantaneous High Flow Quantapluse power supply. 
◆ Oversized Motorola output transistors in the power modules, high damping factor.
◆ Unique Protection Systems. 
◆ Dual, bridge or parallel operation switch on rear panel. 
◆ 2U rugged steel chassis. 
◆ 10 mm thick, extruded and machined duarluminum front panel. 
◆ Twin XLR input connectors. 
◆ Dual Binding posts & speakon output connectors. 
◆ Unobtrusive Gripping Handles in the front panel. 
◆ Slow start system with circuit relay based speaker protection. 
◆ Back to front twin cooling fans. 
◆ Single independent fan on the powersupply 
◆ Electronic continuously variable fan speed control. 
◆ 2U four-channel design, the body light and easy to carry; 

Hits:3562    Print  Back